Configuration Template

Configuration Template at the Profile Level

Configuration templates can be grouped together using a Configuration Profile.

Managed devices can be attached to a Configuration Profile.

This is useful when a managed service is defined as a group of configuration templates and/or Microservices, and has to be applied consistently to multiple Managed Devices.

The SecEngine module will resolve the template for each device's configuration variables and update the device's configuration, one by one, with the created configuration.

It is possible to add a specific template per device (see section below).

Configuration Template at the Device Level

In addition to the configuration profile, it is possible to associate a template directly to a device.

How to add configuration templates to a device

From the device home page menu, select General -> Edit Configuration Files

Adding configuration templates to a device is similar to adding a template to a configuration profile:

  1. Select a template from the Configuration Repository.
  2. Configure the variables attached to the template on the bottom panel.
  3. Save.


Viewing attached files

From the device home page, select the Configuration files tab:


This tab shows all the templates attached to the device.

  • In black: the template that are directly attached to the device
  • In gray: the templates that are attached to a profile (if the device is attached to a configuration profile)

 and  indicate if the template was attached as a pre-configuration or a post-configuration template.

Viewing the resolved templates

As explained in the Configuration Repository page, configuration files that can be uploaded in the repository are templates.
Therefore, they contain variables that have to be declared.

Templates can also contain variables coming from the database. The variables are available through the entry point {$SD} see: Database template variables

Once templates are associated to a device (directly or through a profile), it is possible to view the resulting configuration file:

  • Right click on the attached file and choose View generated file: